Products - Horizontal Machining Centres (HMC)

a51nx

The a51nx is a 400mm horizontal machining center from Makino that builds on the highly successful a51 platform. Key technologies on the machine advance part productivity, accuracy and machine reliability to the next level. The 14,000 RPM high speed, high power spindle features 240 Nm of torque.
a61nx

The a61nx is a 500mm, 40 taper horizontal machining center. The a51nx & a61nx share key machine technologies that take part productivity, accuracy and machine reliability to the next level. The 14,000 RPM high speed, high power spindle features 240 Nm of torque.
a71

The a71 is rapidly becoming one of the most popular platforms for high-volume machining of parts made of cast iron and light alloys. Makinos spindle integration with the drive motors rotor reduces vibration during high-speed operation and increases acceleration/deceleration.
a81

Like the a71, the a81 is rapidly becoming one of the most popular platforms for high-volume machining of parts made of cast iron and light alloys. Makinos spindle integration with the drive motors rotor reduces vibration during high-speed operation and increases acceleration/deceleration.
a81M

The a81M Horizontal Machining Center is designed for machining tough and hard materials. It is ideally suited for large diameter boring and face milling on such materials as stainless steel, titanium alloys , ductile iron, cast iron and CGI.
a82

The a82 brings a whole new performance level for machining mid-sized diesel engine components - or parts requiring a longer travel in the X axis direction. Designed for unparalleled stiffness and rigidity, the a82 is the ideal machine for mid-sized diesel engine block and head machining.
a92

The a92 brings a whole new performance level for machining large parts. Designed for unparalleled stiffness and rigidity, the a92 is the ideal machine for large diesel engine block and head machining. High thrust forces can be applied throughout the work zone without traditional limitations.
A100E

The A100E has an over 80-percent larger footprint than other Makino horizontal machining center at 212" w x 394" d (5,385 mm x 10,005 mm). It is also 20-percent heavier than any other Makino A-Series machine, weighing in at a very stable 66,000 lbs.
a1 Series 5XR

All a1 Series HMCs come with an optional 5-axis option. This 5XR option is ideal for manufacturing applications that require maximum throughput and reliability. This versatile 5XR control specification is currently available on all Makino a1-Series machines.
MAG1

Five-axis horizontal machining center, the MAG1 is specifically designed for high productivity machining of complex aluminum monolithic parts for aerospace. It integrates speed and power of the spindle with a machine platform that provides rapid precision contouring capability while maximizing the percentage of the total time the spindle is cutting.
MAG3 / MAG3.H

A five-axis horizontal machining center, the MAG3 is specifically designed for high productivity machining of complex aluminum monolithic parts for aerospace. It integrates speed and power of the spindle with a machine platform that provides rapid precision contouring capability while maximizing the percentage of the total time the spindle is cutting.
A7

The Makino A7 is engineered for machining the largest aerospace structural parts.
T2

Makino’s new T2 five-axis horizontal machining center dramatically increases titanium milling efficiency, combining lean manufacturing methods and increased metal removal rates for today’s aerospace applications. It is specifically designed for the production of large titanium and titanium alloy aerospace parts such as edge frames, pylons and bulkheads.
T4

The T4 was engineered for machining the largest size of aerospace structural parts.Carbon-fiber-reinforced plastic (CFRP) has been extensively applied to aerospace structural parts to reduce the weight of aircraft and improve their fuel economy. The use of titanium alloys has also been increasing recently because their coefficient of thermal expansion...
J3

With its high-speed and superb accuracy, the J3 delivers optimum technology for simple, cost-effective machining lines. An innovative space- and energy-saving design adds to its flexibility. Designed for Flexible Transfer Lines, the J3 is primarily intended for the economic machining of mass produced aluminum automotive parts.
J4M

With its high-speed and superb accuracy, the J4M delivers optimum technology for simple, cost-effective machining lines. An innovative space- and energy-saving design adds to its flexibility. Designed for Flexible Transfer Lines, the J4M is primarily intended for the economic machining of aluminum parts such as cylinder heads and crankcases for...
J66

Designed for high-volume production lines, Makinos J66 provides flexible high-speed machining. Different parts can be machined easily by selecting a different toolpath program in the NC controller. The J66s easy-to-use graphic interface simplifies programming of tool paths for different parts and separate applications.
MCC3016 / MCC3018

The Makino MCC Series Horizontal Machining Centers are designed to streamline the machining and processing of large plastic injection molds. High performance spindle technology allows roughing and finishing in a single setup. High acceleration motion control allows extraordinary blending and machining performance while maintaining or reducing cycle time resulting in...
MCD1816

The MCD1816 is a heavy-duty horizontal machining center that provides high-speed, high-quality FF machining of heavy dies/molds and large parts. High-accuracy 0.0001° indexing table boosts machining efficiency for shorter delivery times. A highly rigid long nose spindle enhances machining performance to provide deep-end milling and heavy-duty cutting.
MCD2516

The MCD2516 horizontal machining center is designed for high definition machining of dies/molds with deep intricate cavities. It achieves highly stable and accurate machining of workpieces weighing up to 15 tons. A highly rigid spindle with excellent workpiece accessibility boosts machining efficiency for deep cavities.
MCF4025

MCF Series ist designed for high speed precision machining that gives no impression of the large size of components that can be accommodated. MAKINO never compromises the pursuit of high efficiency and precision accuracy, being the consistent concept for this series of machine.
MCF5025

MCF Series ist designed for high speed precision machining that gives no impression of the large size of components that can be accommodated. MAKINO never compromises the pursuit of high efficiency and precision accuracy, being the consistent concept for this series of machine.

Machinespecification

HV Automotive / High-volume

IC Industrial components

J3

With its high-speed and superb accuracy, the J3 delivers optimum technology for simple, cost-effective machining lines. An innovative space- and energy-saving design adds to its flexibility. Designed for Flexible Transfer Lines, the J3 is primarily intended for the economic machining of mass produced aluminum automotive parts. The machine can be easily integrated into different automation concepts due to its "stacked axes" design, isulating all linear movement from the worktable/fixture.

Technical data

Travel X	630 mm
Travel Y	400 mm
Travel Z	400 mm
Rapid Traverse	2362 mm/min
Max Pallet Size	400 kg
Tool Storage Capacity	30
Tool Change Time	2.30 sec

Products - Horizontal Machining Centres (HMC)

22
Horizontal Machining Centres (HMC)

a51nx

a61nx

a71

a81

a81M

a82

a92

A100E

a1 Series 5XR

MAG1

MAG3 / MAG3.H

A7

T2

T4

J3

J4M

J66

MCC3016 / MCC3018

MCD1816

MCD2516

MCF4025

MCF5025

Machinespecification

J3

Technical data

Legal

Maschine series

Service

Webcode

Products - Horizontal Machining Centres (HMC)

22 Horizontal Machining Centres (HMC)

Machinespecification

J3

Technical data

Legal

Maschine series

Service

Webcode

22
Horizontal Machining Centres (HMC)